a
b
c
d
e
f
g
PTZ SETUP (NOT ALL FUNCTIONS ARE AVAILABLE IN LITE VERSION)
a
Select Camera Mode
Sliding the cursor selects the camera to congure and use PTZ settings. These congurations and settings will only work if PTZ
equipped cameras have been installed.
b
PTZ Setup
To enable the PTZ functions, check the “enable PTZ” box. Next, make the appropriate selections from the pull down menus for
“Protocol select”, “Baud rate”, “PTZ port”, and “Address.”
c
Manual Address
You can assign a PTZ address other than the video channel address assigned by the DVR. This is useful in cases of large
infrastructure installations where the number of PTZ camera addresses exceeds 16.
d
Auxiliary Address
This is the address of the auxiliary relay on the camera. Allows you to assign which auxiliary relay on the camera will be
activated by the button on the PTZ control panel.
e
Automatic Camera Operation (not available in Lite Version)
Here you can program patterns and presets that the cameras will automatically change to or operate under after a certain
amount of time. To enable this function, select the “Enable Automatic Operation” box. Next, select the amount of “Wait Time”
before the camera switches to the settings from the drop-down, and select the pattern or preset you want the camera to follow
from the drop-down menu.
f
Patterns (not available in Lite Version)
Here you can program PTZ camera patterns for the cameras to follow regularly. To do so, click the “Pattern Start” button. Then,
enter the pattern using the direction, zoom and focus buttons below. When you have completed the pattern, click “Pattern Stop”
followed by the “Save” button to save the pattern to the selected camera.
20
g
Presets (not available in Lite Version)
Here you can add or delete presets which are pre-set directions/areas for the cameras to focus on and record. To do so, place
the selection its necessary eld and click either “Add” or “Delete.”
Once the selections have been made and settings programmed, they can be viewed on the screen below the setting options and
can be controlled by the control panel to the right using the direction, zoom, and focus keys.
USER SETUP (NOT AVAILABLE IN LITE VERSION)
e administrator is capable of assigning different privileges to different users in order to regulate assess to certain
portions of the system. e privileges that may be assigned are:
RS: Accessing and making changes setup
RA: Accessing local archive
RB: Ability to create backups on CDs
CRVLD: User can remotely access the system
CRVAD: User can view archived video remotely
e administrator can also assign which cameras can be viewed (live or archived) for each user.
Click Exit to return to the main operations screen.
Note: It is recommended that after the initial system configuration/setup is complete, the system administrator change their username
and password from the default settings (“admin” and “super”) to something unique for privacy and security purposes.
•
•
•
•
•
21
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern